[Design and Technology] laser recommendations

Fri Jun 18 01:01:33 UTC 2021

We run a Prytec PLS1060 100W, only had it 4 months but it's running well, had plenty of use so far. After sales support has been excellent. Build quality probably not on par with some other makes out there (time will tell) but the cost for a machine with a 1000mm x 600mm bed with local support was hard to beat. Driver software takes a bit of getting used to.

Good luck with your decision. Happy for you to call if you want further info.
Cheers

Charlie Travis
Design and Technology Leading Teacher
Somerville Secondary College
Ph: 03 5973 1056
E-Mail: ctravis at somervillesc.vic.edu.au<mailto:ctravis at somervillesc.vic.edu.au>
[logosmall]
'Together we use our voice to challenge and grow a confident community'

From: destech <destech-bounces at edulists.com.au> On Behalf Of Travis Burroughs
Sent: Tuesday, 15 June 2021 11:42 AM
To: Design and Technology Teachers' Mailing List <destech at edulists.com.au>
Subject: Re: [Design and Technology] laser recommendations

We are running a Trotech at Templestowe and  Red Baron (PicoKit) at Hampton Park.

The Trotech does a great job engraving and is good for fine quality work. We have 3 issues with it. Firstly it is rated at 80 Watts but functionally it performs like a 30 watt machine. Secondly the software that it uses to cut can be pretty buggy, especially if you are letting students use it. Third, their extended warranty is $4000 a year and there seems to be very little it actually covers.

The Red Baron is a work horse when it comes to cutting. It has the ability to cut through 20mm wood without issues. The user interface is not the best but it can be upgraded to run with Light Burn. Engraving on the Red Baron is not comparable to the Trotech. The Red Baron is also much loader.

Travis Burroughs

Templestowe College Director of Student Led Programs
Student Led & STEM Consultant
in2robotics President
DATTA Victoria President

On Tue, Jun 15, 2021 at 11:06 AM Chris Simpson <C.Simpson at braemar.vic.edu.au<mailto:C.Simpson at braemar.vic.edu.au>> wrote:
We have a Trotec here and very happy with it. Also used Epilog laser from Alfex CNC

CHrisS

-----Original Message-----
From: destech <destech-bounces at edulists.com.au<mailto:destech-bounces at edulists.com.au>> On Behalf Of destech-request at edulists.com.au<mailto:destech-request at edulists.com.au>
Sent: Tuesday, 15 June 2021 10:04 AM
To: destech at edulists.com.au<mailto:destech at edulists.com.au>
Subject: destech Digest, Vol 193, Issue 2

Send destech mailing list submissions to
        destech at edulists.com.au<mailto:destech at edulists.com.au>

To subscribe or unsubscribe via the World Wide Web, visit
        http://edulists.com.au/mailman/listinfo/destech
or, via email, send a message with subject or body 'help' to
        destech-request at edulists.com.au<mailto:destech-request at edulists.com.au>

You can reach the person managing the list at
        destech-owner at edulists.com.au<mailto:destech-owner at edulists.com.au>

When replying, please edit your Subject line so it is more specific than "Re: Contents of destech digest..."

Today's Topics:

   1. Laser Cutter recommendations (Laura Murphy)
   2. Re: Laser Cutter recommendations (Felicity McNamara)

----------------------------------------------------------------------

Message: 1
Date: Mon, 14 Jun 2021 23:58:06 +0000
From: Laura Murphy <pl at datta.vic.edu.au<mailto:pl at datta.vic.edu.au>>
To: "destech at edulists.com.au<mailto:destech at edulists.com.au>" <destech at edulists.com.au<mailto:destech at edulists.com.au>>
Subject: [Design and Technology] Laser Cutter recommendations
Message-ID:
        <SYXPR01MB17580BA7E8D90E7B5C55CD99B0319 at SYXPR01MB1758.ausprd01.prod.outlook.com<mailto:SYXPR01MB17580BA7E8D90E7B5C55CD99B0319 at SYXPR01MB1758.ausprd01.prod.outlook.com>>

Content-Type: text/plain; charset="iso-8859-1"

Hi folks, we've had a question about laser cutters - what do you recommend?

I'm hoping to get some advice/input regarding recommended Laser Cutters. We currently have one Emblazer 2 laser cutter which just isn't keeping up with large student use across D/T classes and wider student use. I've certainly looked at a lot of different brands from LST, Trotec, Prytec and my head is spinning. Is there a brand that you know schools are endorsing or using? Thanks very much.

Thanks, L

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20210614/6153a151/attachment-0001.htm>

------------------------------

Message: 2
Date: Tue, 15 Jun 2021 00:25:42 +0000
From: Felicity McNamara <Felicity.McNamara at carey.com.au<mailto:Felicity.McNamara at carey.com.au>>
To: Design and Technology Teachers' Mailing List
        <destech at edulists.com.au<mailto:destech at edulists.com.au>>
Subject: Re: [Design and Technology] Laser Cutter recommendations
Message-ID:
        <SY4PR01MB701045B6861BC4FABC28903FD2309 at SY4PR01MB7010.ausprd01.prod.outlook.com<mailto:SY4PR01MB701045B6861BC4FABC28903FD2309 at SY4PR01MB7010.ausprd01.prod.outlook.com>>

Content-Type: text/plain; charset="windows-1252"

We have a trotec- speedy 360.

  *   Has been brilliant
  *   Have had it for 6 years.
  *   Fast and reliable
  *   Has not missed a beat for 6 years,
  *   but is very pricey to buy- but I think can be leased
  *   serviced once a year
  *   have had to replace the lens once in 6 years

Felicity McNamara,
Product Design and Technology Leading Teacher Senior School Cartwright Mentor 1st XVIII Boys Football Manager Phone +61 3 9816 1576 carey.com.au<http://carey.com.au><https://www.carey.com.au/>
[signature_728583348]
349 Barkers Road Kew VIC 3101 Australia
ABN 83 051 576 062 | CRICOS #00135G

"Imagination is more important than knowledge. For knowledge is limited, whereas imagination encircles the world"
-Albert Einstein<https://en.wikipedia.org/wiki/Albert_Einstein>

Please note: My working hours may not be the same as your working hours.
Please don't feel obligated to reply outside of your normal work schedule.

From: destech <destech-bounces at edulists.com.au<mailto:destech-bounces at edulists.com.au>> on behalf of Laura Murphy <pl at datta.vic.edu.au<mailto:pl at datta.vic.edu.au>>
Date: Tuesday, 15 June 2021 at 9:58 am
To: destech at edulists.com.au<mailto:destech at edulists.com.au> <destech at edulists.com.au<mailto:destech at edulists.com.au>>
Subject: [Design and Technology] Laser Cutter recommendations Hi folks, we've had a question about laser cutters - what do you recommend?

I'm hoping to get some advice/input regarding recommended Laser Cutters. We currently have one Emblazer 2 laser cutter which just isn't keeping up with large student use across D/T classes and wider student use. I've certainly looked at a lot of different brands from LST, Trotec, Prytec and my head is spinning. Is there a brand that you know schools are endorsing or using? Thanks very much.

Thanks, L

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20210615/a2d18529/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 26170 bytes
Desc: image001.png
URL: <http://edulists.com.au/pipermail/destech/attachments/20210615/a2d18529/attachment.png>

------------------------------

Subject: Digest Footer

_______________________________________________
destech mailing list
destech at edulists.com.au<mailto:destech at edulists.com.au>
http://edulists.com.au/mailman/listinfo/destech

------------------------------

End of destech Digest, Vol 193, Issue 2
***************************************
________________________________
 Please consider the environment before printing this email.
Disclaimer: Whilst every attempt has been made to ensure that material contained in this email is free from computer viruses or other defects, the attached files are provided, and may only be used, on the basis that the user assumes all responsibility for use of the material transmitted. This email is intended only for the use of the individual or entity named above and may contain information that is confidential and privileged. If you are not the intended recipient, please note that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone 03 5427 2500 and destroy the original message. The contents of this message are provided without responsibility in law for their accuracy or otherwise and without assumption of a duty of care by Braemar College Ltd.
________________________________
_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
Design and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and
DATTA Vic - Design and Technology Teachers' Association of Victoria
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20210618/47add9c7/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3407 bytes
Desc: image001.jpg
URL: <http://edulists.com.au/pipermail/destech/attachments/20210618/47add9c7/attachment-0001.jpg>