[Design and Technology] destech Digest, Vol 183, Issue 125

Fri Aug 21 05:17:45 UTC 2020

Maybe if you get stuck, and tutorials aren’t helping, someone out here could help with your queries over Zoom or some such – share a screen and away you go?  Better time than ever to practice those 21st century skills right?  I’ve started to laugh now, at” 21’s century skills”.  We’re 20 years into it.

David Pitt Head of Department – Design Technology
[cid:image001.png at 01D677CE.37F13010]
T +61 3 9807 8888
E dpitt at huntingtower.vic.edu.au<mailto:dpitt at huntingtower.vic.edu.au>
W https://www.huntingtower.vic.edu.au<https://www.huntingtower.vic.edu.au/>
77 Waimarie Drive, Mount Waverley, Victoria 3149, Australia

This e-mail is intended only for the use of the individual or entity named above and may contain information that is confidential or privileged. If you are not the intended recipient, please note that any dissemination, distribution, or copying of this email is strictly prohibited. If you have received this e-mail in error, please notify me immediately by return e-mail or telephone, and destroy the original message. Whilst every attempt has been made to ensure that material contained in this e-mail is free from computer viruses or other defects, the attached files are provided, and may only be used, on the basis that the user assumes all responsibility for use of the material transmitted.

From: destech <destech-bounces at edulists.com.au> On Behalf Of Maryann AUGUSTINUS
Sent: Friday, 21 August 2020 3:10 PM
To: destech at edulists.com.au
Subject: Re: [Design and Technology] destech Digest, Vol 183, Issue 125

Thankyou so much for your quick replies to my CAD enquiry
Very informative feedback. It looks like I now need to learn fusion 360.
I have the datta vic info to look at and a big thankyou for your links and advice
Regards Maryann Augustinus UHS

On Fri, Aug 21, 2020 at 3:03 PM <destech-request at edulists.com.au<mailto:destech-request at edulists.com.au>> wrote:
Send destech mailing list submissions to
        destech at edulists.com.au<mailto:destech at edulists.com.au>

To subscribe or unsubscribe via the World Wide Web, visit
        http://edulists.com.au/mailman/listinfo/destech
or, via email, send a message with subject or body 'help' to
        destech-request at edulists.com.au<mailto:destech-request at edulists.com.au>

You can reach the person managing the list at
        destech-owner at edulists.com.au<mailto:destech-owner at edulists.com.au>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of destech digest..."

Today's Topics:

   1. Re: Which CAD to learn (David Pitt)

----------------------------------------------------------------------

Message: 1
Date: Fri, 21 Aug 2020 05:02:44 +0000
From: David Pitt <dpitt at huntingtower.vic.edu.au<mailto:dpitt at huntingtower.vic.edu.au>>
To: Design and Technology Teachers' Mailing List
        <destech at edulists.com.au<mailto:destech at edulists.com.au>>
Subject: Re: [Design and Technology] Which CAD to learn
Message-ID:
        <B19C6DABC7880545A6262B7890B580FC021A110DFB at EXCHANGEDBS1.huntingtower.vic.edu.au<mailto:B19C6DABC7880545A6262B7890B580FC021A110DFB at EXCHANGEDBS1.huntingtower.vic.edu.au>>

Content-Type: text/plain; charset="utf-8"

I’m a big fan of Fusion 360.

Good mix of parametric, direct modelling, sketching workspaces with room to grow.  At its basic level though, its very accessible for kids and more intuitive than expected.  I’ve had  year 8 students handle it well, even prefer it over “simpler” options.

David Pitt Head of Department – Design Technology
[cid:image001.png at 01D677CC.1F1A9D80]
T +61 3 9807 8888
E dpitt at huntingtower.vic.edu.au<mailto:dpitt at huntingtower.vic.edu.au><mailto:dpitt at huntingtower.vic.edu.au<mailto:dpitt at huntingtower.vic.edu.au>>
W https://www.huntingtower.vic.edu.au<https://www.huntingtower.vic.edu.au/>
77 Waimarie Drive, Mount Waverley, Victoria 3149, Australia

This e-mail is intended only for the use of the individual or entity named above and may contain information that is confidential or privileged. If you are not the intended recipient, please note that any dissemination, distribution, or copying of this email is strictly prohibited. If you have received this e-mail in error, please notify me immediately by return e-mail or telephone, and destroy the original message. Whilst every attempt has been made to ensure that material contained in this e-mail is free from computer viruses or other defects, the attached files are provided, and may only be used, on the basis that the user assumes all responsibility for use of the material transmitted.

From: destech <destech-bounces at edulists.com.au<mailto:destech-bounces at edulists.com.au>> On Behalf Of Lewis C
Sent: Friday, 21 August 2020 2:11 PM
To: Design and Technology Teachers' Mailing List <destech at edulists.com.au<mailto:destech at edulists.com.au>>
Subject: Re: [Design and Technology] Which CAD to learn

I started using Onshape last year. It’s free, can run on most computers as it’s browser based.

I started using Fusion this year and wouldn’t look back (assuming computers can run it). They’re similar in they way you draw. Onshape seems to be a stripped back version of Fusion. We started with these tutorials on YT and students picked it up within a few weeks. https://www.youtube.com/watch?v=6yPKMSb6ja8&t=1s

Here’s a headphone stand I wasp laying around with. The renderings are fantastic. https://a360.co/30V5IbX

Lewis.

On Fri, 21 Aug 2020 at 1:49 pm, Maryann AUGUSTINUS <MAUGUSTINUS at unihigh.vic.edu.au<mailto:MAUGUSTINUS at unihigh.vic.edu.au><mailto:MAUGUSTINUS at unihigh.vic.edu.au<mailto:MAUGUSTINUS at unihigh.vic.edu.au>>> wrote:
Change of topic.

I am trying to decide which CAD to use with kids. onshape or fusion 360
I am a novice at both myself.
Is one easier than the other?
Will be using it for preparing /designing for CNC and Laser cutting
We dont have access to desktop computers so students will be using their own devices and as far as I know these programs are available online?

Regards M Augustinus UHS

_______________________________________________

http://www.edulists.com.au<http://www.edulists.com.au/> - FAQ, resources, subscribe, unsubscribe

Design and Technology Mailing List kindly supported by

http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and

DATTA Vic - Design and Technology Teachers' Association of Victoria

________________________________
Disclaimer: Whilst every attempt has been made to ensure that material contained in this email is free from computer viruses or other defects, the attached files are provided, and may only be used, on the basis that the user assumes all responsibility for use of the material transmitted. This email is intended only for the use of the individual or entity named above and may contain information that is confidential and privileged. If you are not the intended recipient, please note that any dissemination, distribution or copying of this email is strictly prohibited. If you have received this email in error, please notify us immediately by return email or telephone 03 9365 9365 and destroy the original message. The contents of this message are provided without responsibility in law for their accuracy or otherwise and without assumption of a duty of care by Adventist Schools Victoria.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20200821/90f730e1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 58850 bytes
Desc: image001.png
URL: <http://edulists.com.au/pipermail/destech/attachments/20200821/90f730e1/attachment.png>

------------------------------

Subject: Digest Footer

_______________________________________________
destech mailing list
destech at edulists.com.au<mailto:destech at edulists.com.au>
http://edulists.com.au/mailman/listinfo/destech

------------------------------

End of destech Digest, Vol 183, Issue 125
*****************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20200821/5a297abd/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 58850 bytes
Desc: image001.png
URL: <http://edulists.com.au/pipermail/destech/attachments/20200821/5a297abd/attachment-0001.png>