[Design and Technology] CAD program

[Judy Moore]

Hi Shane,
Judy from DATTA Vic here. I will put your name on the list to be notified when the next workshop is to be run. We have set a tentative date for 14 & 21 November.

Regards,
Judy Moore
DATTA Vic Office Manager
admin at datta.vic.edu.au
  ----- Original Message ----- 
  From: SHANE CROWHURST 
  To: Design and Technology Teachers' Mailing List 
  Sent: Thursday, June 25, 2009 10:16 AM
  Subject: RE: [Design and Technology] CAD program


  Roger,

   

  I have just returned from the PSCIA conference in Albury.

  One of the presenters was Dr Tony Pugatschew from Intellecta Technologies with his demo of a Roland MDX-40 3D modelling machine.

  He used and recommended the Pro Engineer program and you.

   

  Can you put me on a list or something for information about the next course, as I found the website posed too many questions.

   

  Thanks, Shane. 

   

  From: destech-bounces at edulists.com.au [mailto:destech-bounces at edulists.com.au] On Behalf Of Roger Knight
  Sent: Wednesday, 24 June 2009 3:26 PM
  To: Design and Technology Teachers' Mailing List
  Subject: RE: [Design and Technology] CAD program

   

   Catherine

   

  I can thoroughly recommend Pro Engineer. This is a free 3D package by PTC the world industry leader in 3D modelling.

  To obtain the software teachers must complete a 12hr training course at a cost of approx. $300.00. On completion of the course they receive the software discs (schools edition) and each teacher is then able to authorise a site licence for 300 seats.

  DATTA Vic run these courses for which I am the instructor. We will be running courses in term 3. Check with DATTA vic fro details.

  The PTC website can be found at 

   

  http://ptc.com/

   

  Best regards ... Roger

   

  Roger Knight

  Technology Faculty.

  St Patrick's College

  1431 Sturt Street

  BALLARAT 3350 VIC

  5331 1688

  Mobile 0424395401

  rknight at stpats.vic.edu.au

   


------------------------------------------------------------------------------

  From: Ortlieb, Catherine S
  Sent: Wed 24/06/2009 2:46 PM
  To: destech at edulists.com.au
  Subject: [Design and Technology] CAD program

  A couple of years ago, we switched from using TriCAD to Solid Edge for our Year 9 CAD elective. It was also being used by senior technology students in subjects such as Wood.  Apart from being a much superior program, the licence fee was very attractive.  This year we experienced some difficulties as the company has new owners.  They want about $6,000 for the licence next year which we can't afford. Can anyone suggest  suitable alternative CAD software which isn't so expensive?

  Thanks

  Cath Ortlieb, Croydon Secondary College

  Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.

  _______________________________________________ 
  http://www.edulists.com.au/- FAQ, resources, subscribe, unsubscribe 
  Design and Technology Mailing List kindly supported by 
  http://www.vcaa.vic.edu.au/vce/studies/des! igntech/destechindex.html- Victorian Curriculum and Assessment Authority and 
  DATTA Vic - Design and Technology Teachers' Association of Victoria 

  _______________________________________________ 
  http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe 
  Design and Technology Mailing List kindly supported by 
  http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html - Victorian Curriculum and Assessment Authority and 
  DATTA Vic - Design and Technology Teachers' Association of Victoria

  _______________________________________________ 
  http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe 
  Design and Technology Mailing List kindly supported by 
  http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html - Victorian Curriculum and Assessment Authority and 
  DATTA Vic - Design and Technology Teachers' Association of Victoria 


------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.339 / Virus Database: 270.12.90/2200 - Release Date: 06/24/09 12:49:00


-- 
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 270 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20090625/ad3d6a34/attachment-0001.html