[Systems Engineering Teachers' Mailing List] FW: VictorianSystems Engineering Teachers Group

Mon Aug 13 14:21:29 EST 2007

Rob, can you please fwd information re edulists?

Roger Knight
Technology Dept.
St Patrick's College
1431 Sturt Street
BALLARAT 3350 VIC
5331 1688
rknight at stpats.vic.edu.au

________________________________

From: syseng-bounces at edulists.com.au on behalf of Robert Minato
Sent: Mon 8/13/2007 11:51 AM
To: syseng at edulists.com.au
Subject: Re: [Systems Engineering Teachers' Mailing List] FW: VictorianSystems Engineering Teachers Group 

Divide and conquer or divide and fail. Why have two groups when the same can
be done on one. I also encourage everyone to participate but suggest only
one group (either edulists or edna) rather than two.

Rob
--
Robert Minato
Technology Leader
Catholic College Wodonga
1 Bowman Crt
Wodonga 3690
02 6043 5546

On 11/8/07 9:24 AM, "Neville YOUNG" <NYO at gwsc.vic.edu.au> wrote:

> Dear Systems Members
> I have forwarded on this message from Adriana Agosta about the new site for
> Systems Engineering Teachers. You can post information, worksheets, ask
> questions or access information at the site for use in your class. Please
> visit the site and register some of your work. I think that it will prove to
> be very useful.
> 
> Neville Young
>
> ________________________________
>
> From: Adriana Agosta [mailto:eo at teav.vic.edu.au]
> Sent: Fri 3/08/2007 12:16 PM
> To: tur at wssc.vic.edu.au; Brian Pinches; coleman.martin.j at edumail.vic.gov.au;
> paviag at newhavencol.vic.edu.au; bw at crcsydenham.net;
> magnisalis.theo.t at edumail.vic.gov.au; jonesdeanr at edumail.vic.gov.au;
> emvanle at yahoo.com.au; nipper at alphalink.com.au; Neville YOUNG;
> kdullard at ccb.vic.edu.au; Eager, Bruce L; John Glancy;
> mcelroy.philip.e at edumail.vic.gov.au; dorr at ringwoodsc.vic.edu.au; David
> Carpenter; ammar_badawi2004 at yahoo.com; bowen at ringwoodsc.vic.edu.au;
> prismall.kevin.e at edumail.vic.gov.au; lionel.whelan at notredame.vic.edu.au;
> murphys at kardinia.vic.edu.au; Paul Jackson; ward.peter at edumail.vic.gov.au
> Subject: Fw: Victorian Systems Engineering Teachers Group
>
>
> Hello Systems Group,
> 
> It is with great pleasure that I announce the addition of the Systems
> Engineering Group to EdNA.
> I take this opportunity to congratulate Peter Ward on your behalf for all his
> efforts and know-how in setting up and realising
> this initiative which I'm certain will benefit all Systems teachers.
> If it is to be a successful resource, it needs to be supported by way of
> contributions.Peter has agreed to manage the site however, it remains the
> responsibility of ALL the individuals making up the Systems Engineering
> teacher group to provide submissions, share information/resources and maintain
> dialogue between the group members.
> The thing that delights me most about this idea is, that it has come from YOU!
> I remind you too, that the Syseng edulist is still available to you and that
> it remains separate to the EdNA  facility.
> 
> Below is Peter's correspondence to me including the steps to register and
> access the site.
> Please take the time to register. Should you encounter any problems regarding
> registration, contact Peter Ward
> ward.peter at edumail.vic.gov.au
>
> 
> 
> Best Wishes
> 
> Adriana
> 
> 
> 
> "These are the instructions I received from EdNA to send to our teachers to
> get them started...
>
>
> Your group members will need to Register with edna Groups, and the best
> way to do that is to direct them to http://www.groups.edna.edu.au <http://www.groups.edna.edu.au/> 
> <http://www.groups.edna.edu.au/>  and
> then to click on Register. They will be required to confirm that
> registration by email.
>
>
> Now I have the group ready for members, I have changed the
> Availability setting to Public and now leave the invitation key to do
> the work of keeping the group private.
>
>
> Once they have registered and the group is made available to them, they
> will be able to access it by going to
> http://www.groups.edna.edu.au/course/view.php?id=1469
> <http://www.groups.edna.edu.au/course/view.php?id=1469>   and inputting the
> invitation key.
>
>
> The invitation key is VSET
>
>
> We expect all Group members to comply with netiquette as defined in our
> Conditions of Use.
> These can be found at
> http://www.groups.edna.edu.au/mod/resource/view.php?id=28343
> <http://www.groups.edna.edu.au/mod/resource/view.php?id=28343>  and a link
> is displayed in your "welcome" section.
>
>
> I hope you find all this satisfactory.
>
>
> Let me know how you go accessing the Group and if there are any problems."
>
>
>
>
>
>
> Peter A Ward
>
>
> Euroa Vic. 3666
> Ph. 03 57951039
>
>   
> 
> 
> ----- Original Message -----
> From: Peter Ward <mailto:pward at mcmedia.com.au>
> To: Adriana Agosta <mailto:eo at teav.vic.edu.au>
> Sent: Wednesday, August 01, 2007 7:31 PM
> Subject: Victorian Systems Engineering Teachers Group
>
> Dear Adriana,
>
> I have spent some time getting the EdNA Group set up with the help of Kerrie
> Smith from EdNA. Its a bit of a learning curve but I think I have it sorted
> out. I have tried to make it operate as simple as possible. As recommended by
> Kerrie, I have set up a forum for sharing resources, called Systems
> Engineering Share Point. Users will need to click on this forum to read any
> posts and make their contributions. I have put in an initial post to welcome
> everybody. I have used your name and title along with mine as I thought it
> appropriate for this welcome post as it was our combined effort to get the
> share point working.
>
> These are the instructions I received from EdNA to send to our teachers to get
> them started...
>
> Your group members will need to Register with edna Groups, and the best
> way to do that is to direct them to http://www.groups.edna.edu.au <http://www.groups.edna.edu.au/> 
> <http://www.groups.edna.edu.au/>  and
> then to click on Register. They will be required to confirm that
> registration by email.
>
> Now I have the group ready for members, I have changed the
> Availability setting to Public and now leave the invitation key to do
> the work of keeping the group private.
>
> Once they have registered and the group is made available to them, they
> will be able to access it by going to
> http://www.groups.edna.edu.au/course/view.php?id=1469
> <http://www.groups.edna.edu.au/course/view.php?id=1469>   and inputting the
> invitation key.
>
> The invitation key is VSET
>
> We expect all Group members to comply with netiquette as defined in our
> Conditions of Use.
> These can be found at
> http://www.groups.edna.edu.au/mod/resource/view.php?id=28343
> <http://www.groups.edna.edu.au/mod/resource/view.php?id=28343>  and a link
> is displayed in your "welcome" section.
>
> I hope you find all this satisfactory.
>
> Let me know how you go accessing the Group and if there are any problems.
>
>
>
> Peter A Ward
>
> Euroa Vic. 3666
> Ph. 03 57951039
>
>
>
>
>
> _______________________________________________
> http://www.edulists.com.au <http://www.edulists.com.au/>  - FAQ, resources, subscribe, unsubscribe
> Systems and Technology Mailing List kindly supported by
> http://www.vcaa.vic.edu.au/vce/studies/systemseng/systemsengindex.html -
> Victorian Curriculum and Assessment Authority and
> TEAV - Technology Education Association of Victoria
>

_______________________________________________
http://www.edulists.com.au <http://www.edulists.com.au/>  - FAQ, resources, subscribe, unsubscribe
Systems and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/systemseng/systemsengindex.html - Victorian Curriculum and Assessment Authority and
TEAV - Technology Education Association of Victoria

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 11774 bytes
Desc: not available
Url : http://www.edulists.com.au/pipermail/syseng/attachments/20070813/29f1ae4a/attachment-0001.bin