[Design and Technology] Veneers for Skateboard Makind

[Dawes, Paul j]

I'd love any info you have on this.  I know another guy who did something similar to you.  And Arthur Bersey did skate deck PDs a few years ago - i have his .ppt presentation somewhere.  He made up a big screw/clamp device for his boards which required the making of the male/female moulds that had to be exact so the plywood wouldn't de-laminate.  This is what scared me off the idea initially.  I have a few other (PE) teachers interested in making some for themselves so we're on the lookout for ideas and inspirations now - anything you have would be appreciated!

Paul


-----Original Message-----
From: destech-bounces at edulists.com.au on behalf of James Roberts
Sent: Fri 25/03/2011 11:18 AM
To: Design and Technology Teachers' Mailing List
Subject: Re: [Design and Technology] Veneers for Skateboard Makind
 
I've made them in the past using 3mm ply from Bunnings (have used both interior and exterior grade - depends on what is available). 3 sheets with grain going lengthways and 2 going across (total 15mm deck can make thicker), alternating as you go.  We found we could make the decks for about a 1/3 of the price as a shop bought one and in most cases were more robust....the downside is that your mould (double kick with concave) needs to be quite substantial (heavy/rigid) with plenty of support over the entire surface (top and bottom), you also want sufficient clamping - we used 6 sash cramps and ensure the glue (regardless of what glue or what the directions say) covering the entire surface on all joining surfaces. If you require a sketch of a mould design, let me know?

Regards
James


James Roberts
Head of Campus - Cranbourne East
St Peter's College
PO Box 615
Cranbourne, VIC 3977
PH: (03) 5996 6733  FAX: (03) 5996 8277

The contents of this email are confidential. Any unauthorised use of the content is expressly prohibited. If you have received this email in error, please advise by reply email or telephone immediately and then delete the email. Thank you

-----Original Message-----
From: destech-bounces at edulists.com.au [mailto:destech-bounces at edulists.com.au] On Behalf Of Dawes, Paul j
Sent: Friday, 25 March 2011 10:29 AM
To: Design and Technology Teachers' Mailing List
Subject: RE: [Design and Technology] Veneers for Skateboard Makind

Google "canadian rock maple".  There was a skateboard supplier somewhere doing it but i could never work their website.  

A quick search found this forum with a supplier in Sydney's number:
http://www.woodworkforums.com/f14/canadian-rock-maple-veneer-ply-19902/

If you have any success please let me know - it's a project i've wanted to try with my kids for years.

Paul Dawes

-----Original Message-----
From: destech-bounces at edulists.com.au on behalf of phillip britton
Sent: Thu 24/03/2011 10:44 AM
To: destech at edulists.com.au
Subject: [Design and Technology] Veneers for Skateboard Makind
 
Hi all,
Can anyone give me the names of some suppliers of veneers suitable for making skateboard decks in Melbourne.
Regards
Phillip Britton
Apollo Bay P-12 College
Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.

_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria


_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
Design and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and
DATTA Vic - Design and Technology Teachers' Association of Victoria


Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/ms-tnef
Size: 5174 bytes
Desc: not available
Url : http://www.edulists.com.au/pipermail/destech/attachments/20110325/a3afb417/attachment-0001.bin