[Design and Technology] Lamp project

[Aeschlimann, Heather j]

You can get parts from Designability. They also have a course outline
and book. The only thing that needs to be done is using a screwdriver to
tighten screw on wire end. I have done this with 3 year 10 groups and
only once was there an issue when one student put both ends together in
one side. Globe blew when turned on. 

Cheers, Heather

________________________________

From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of pauldawes
Sent: Monday, 21 July 2008 10:35 AM
To: 'Design and Technology Teachers' Mailing List'
Subject: [Design and Technology] Lamp project

 

Hi all,

 

Has anyone undertaken a lamp project in middle-senior years recently?

 

I am considering doing one that is relatively cheap (no low-voltage) and
doesn't require me to do any 240V wiring.  I can't seem to locate anyone
who can supply me the plug-switch-socket in one piece.  I don't want to
have to go to an electrician to check them all - or do I have no choice?

 

If anyone out there has experience, supplier contacts, design briefs,
etc.. and would like to share I'd appreciate it.

 

Cheers,

 

Paul Dawes

Materials & Design Technology Manager

Patterson River Secondary College

Eel Race Road, Carrum 3197

(t) 8770 6700

(f) 9786 9810

(m) 0417 983 711

 

This email and any files transmitted with it are priveliged and
confidential information intended solely for the use of the addressee.
If you have received this email in error you must not disseminate, copy
or take any action in reliance on it.  Please immediately notify PRSC by
return email to the sender and delete the original email.

 

Important - This email and any attachments may be confidential. If
received in error, please contact us and delete all copies. Before
opening or using attachments check them for viruses and defects.
Regardless of any loss, damage or consequence, whether caused by the
negligence of the sender or not, resulting directly or indirectly from
the use of any attached files our liability is limited to resupplying
any affected attachments. Any representations or opinions expressed are
those of the individual sender, and not necessarily those of the
Department of Education and Early Childhood Development.

_______________________________________________ 
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html%20%
20> - Victorian Curriculum and Assessment Authority and 
DATTA Vic - Design and Technology Teachers' Association of Victoria


Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20080721/c27a89cf/attachment-0001.html